Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.
This isn't a bunch of loose inlets scattered around your rig - this docking station keeps all your essential hookups in one tidy, recessed panel built right into your RV's wall. A thumb-latch door protects everything when not in use, and built-in gates let you close the door even with hoses connected. That means your setup stays clean, and your connections stay protected, all while keeping the outside of your rig neat.
Whether you're hooked up at a campsite or preparing for off-grid travel, you can switch between using city water and filling your RV's fresh-water tank just by flipping a switch. No crawling around to reroute hoses. Just hook up once and choose the mode that fits your day. It's quick, it's simple, and it makes camp setup easier every time.
When it's time to clean your black-water tank, you shouldn't have to mess with shared connections. This docking station gives you a dedicated inlet just for flushing the tank. Hook up a separate hose, flush it out thoroughly, and move on without worrying about cross-contamination or mess.
Both water inlets are equipped with check valves that prevent water from backflowing into your hose. It's one of those details you don't always see but makes a difference in keeping your water supply clean and your setup worry-free.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steven here with etrailer. Today, we're looking at our B and B Mini RV Water Center with your city tank fill or winterized option, tank flush option, and you have a switch there for the pump and the light. So folks, this is a nice compact design. I've got it unlocked already. Basically everything you need to use and do is inside, whether you're switching to flush, winterize, or fill.
You get your connections here with the built-in screen already. And of course, your pump switch, a light switch. And the door has a nice little flap here that you can open and put out of the way. That way you can close it and still have your connection there ready to go. And of course, the key, if you wanna lock everything, keep everything nice and secure, you have the butyl tape for installation and the painted head screws as well for installation.
And I like the fact that on the door they even give you a little sticker that explains what you're doing, how everything operates as well. And again, you have a built-in pump control right there from the panel using the switch to pressurize your tank supply, which is nice. So as you can see, there's a lot of stuff sticking out the back here, all your connections. The depth of this, they only measure from the actual box part itself, and that's about 2 1/8th inches deep, 6 1/2 inches tall by 7 5/8ths wide when the cutout you're gonna need to cut out is 4 7/8ths tall by 6 inches wide. So again, folks, this is a great option for you if you need to replace your B and B Mini RV Water Center unit.
And if you have any questions about this or any of the products we carry, always reach out to us here at etrailer.com. We'd be more than happy to assist you any way we can. That's gonna wrap up our look together. I'm Steven. Thanks for watching.
.
Works as designed. Easy install.
Perfect drop in to the old unit. Was up and running in 30 minutes total.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.